in line bottle rinser

Winegrowers Supplies - Automatic bottle pre-rinsing

Bottle rinsing turret integrated in front of a bottle filler:-

6 grippers: 17,749 Euros

9 grippers: 18,735 Euros

12 grippers: 22,690 Euros

The standard rinser works in two steps, first rinsing (with a liquid or with air or with inert gas) and afterwards draining.

The bottle is taken from the conveyor belt and positioned corresponding to the gripper, seizing it tight in the neck. During the rotation of the carousel,
the gripper is upturned by 180° by means of a suitably shaped tubular cam, putting the bottle in a vertical position with the mouth downwards and adjacent to an injection nozzle.

After rinsing, the dripping phase starts, it ends when the gripper rotates downwards again positioning the bottle in the star-wheel leading it on the conveyor belt and towards the filling turret.

There is an option for double treatment, in three steps: rinsing (liquid or air), then a second rinsing (liquid or air), then draining. .... Euros.

Change parts for additional bottle size, 900 Euros
Change parts for additional bottle neck shape, 700 Euros

Electronic speed change by inverter with manual adjustment by potentiometer, 1700 Euros
This is not necessary if ordered with a bottle filler and capper/corker monobloc, as electronic regulation of the whole unit is included as standard.

Air blow to remove the last drop from the bottle neck after rinsing, 960 Euros
This is only needed for bottling spirits or exceptional wines, where even a small drop of water is to be avoided.

Twin stainless steel filter cartridge housings, 10", with 1 micron and 0.45 micron filter cartridges, for the water supply, 2 @ 800 Euros each
Note: you can use plastic filter housings instead.

Delivery time: 60 to 90 days from the date of the order; advance payment and all samples.

Installation and commissioning: on site installation by specialist engineers is not included in prices quoted. If required, the relevant charges would be: 500 Euros x 3 days, plus flight and accomodation costs.

Warranty: covers any defective part for a period of 12 months from the date of delivery. The warranty does not include materials which are subject to normal wear, the accidental damage caused by transportation, carelessness, unsuitable handling, improper use and any behaviour which is not compliant with the warnings indicated on the instruction manual. The replacement parts will be supplied ready to be installed.

Prices shown are exclusive of Vat.
Delivery usually will need to be charged at cost.