Steam generators for steam sterilisation

Winegrowers Supplies - Steam generators - for steam sterilisation of bottling lines or tanks or barrels

Gebhardt: with instantaneous heater:-

Made in Germany, easy to use, steam available after 2 minutes, water consumption in litres/hour = steam out in kilos/hour, steam comes out at approximately 110 °C, easy to de-scale.

TD-9/2, 9.9 kWatt (15 kilos/hour of steam), 380 volts (3-phase), 50 kilos, 750 x 310 x 680 mm, 4139 Euros

Or if you have only a 230 volt electricity supply there is a 230 volt model built with a single-phase of 9.9 kWatt, .... Euros
The single phase 9.9 kWatt has a very thick cable and must be connected directly to the Main electricity supply board; with MCB and RCD. Please discuss this with your electrician.

or TD-13/3, 13.2 KWatt (20 kilos/hour of steam), 380 volts (3-phase), 55 kilos, 750 x 310 x 680 mm, 4696 Euros

or TD-23/3, 23 kWatt (35 kilos/hour of steam), 380 volts (3-phase), 60 kilos, 750 x 310 x 680 mm, 7359 Euros

or TD-33/3, 33 kWatt (55 kilos/hour of steam), 380 volts (3-phase), 75 kilos, 850 x 310 x 680 mm, 9362 Euros

and a special hose for the steamer outlet, that withstands high temperature to 164 °C:
20 mm internal diameter, 31 mm outside diameter, 2 metres long with DIN25 coupling to the steamer, 60 Euros

or for use with barriques: Gebhardt BDF20-04 including 4 metre steam hose of 19 mm internal diameter, 31 mm outside diameter, and a DIN25 cooupling, 285 Euros

Prices shown are exclusive of Vat, as at July 2022.
Delivery will need to be charged at cost.