Winegrowers Supplies  -  Replacement Pneumatic Sealing Tubes - for Variable Capacity tanks

Variable Capacity tanks are 'always full' due to the separate pneumatically sealed inner lid which can be set at any height within the tank;
during fermentation it is set about 2 inches above the liquid surface, at other times the lid is lowered to rest on the liquid.

The pneumatic sealing tube is pumped up (to 0.5 Bar) with a small hand pump rather like a bicycle tyre pump.
When the sealing tubes are new they are a very tight fit, difficult to stretch around the lid. With use they stretch gradually and become progressively easier to fit.

Replacement pneumatic sealing tubes:-

including the alloy connection piece and one spring-clip.

Note: the sizes are for the outside diameter of the lid, not the internal diameter of the tank.

for Lid diameter 32 cm  18.20
for Lid 35 cm  18.20
for Lid 38 cm  18.60
for Lid 40 cm  18.60
for Lid 43 cm  19.00
for Lid 45 cm  19.00
for Lid 48 cm  20.45
for Lid 50 cm  20.45
for Lid 54/55 cm  21.25
for Lid 60 cm  22.50 - the size for 230+330 litre Italian tanks, also ECO 200+300 litre
for Lid 65 cm  23.15
for Lid 70 cm  24.55
for Lid 75 cm  25.00 - the size for 530+630 litre Italian tanks
for Lid 80 cm  26.20
for Lid 82 cm  27.00
for Lid 85 cm  27.40
for Lid 90 cm  28.20
for Lid 95 cm  29.00 - the size for 800+1000 litre Italian tanks

for Lid 100 cm  30.20
for Lid 105 cm  31.10
for Lid 110 cm  31.90
for Lid 115 cm  33.55
for Lid 120 cm  34.35
for Lid 125 cm  34.75
for Lid 130 cm  36.00
for Lid 135 cm  37.65
for Lid 140 cm  38.45
for Lid 145 cm  39.65
for Lid 150 cm  40.50
for Lid 155 cm  41.70
for Lid 160 cm  42.55
for Lid 165 cm  44.60
for Lid 170 cm  45.40
for Lid 175 cm  46.20
for Lid 180 cm  47.45
for Lid 185 cm  48.25
for Lid 190 cm  49.10
for Lid 200 cm  51.95
for Lid 210 cm  58.10

Prices shown are exclusive of Vat.
Delivery will need to be charged at cost.

www.winegrowers.info