Winegrowers Supplies  -  Collecting hopper and auger - for de-stemmed grapes

                  

Hopper with 230 volt motorised auger: 600 Euros

390 mm x 390 mm x 200 mm deep; 380 mm high including the leg.

Can be connected directly to a rubber impeller pump (Z110 or Z180) or a large eccentric screw (monho) pump.

Note: we have found that the above hopper does not work with milled apples, due to the steep sides of the hopper, which results in 'bridging' from one side to the other, so the apple pieces are in an arch above the auger.

 

 

Low level hopper on four castors, with 0.55 kWatt, 230 Volt motorised auger: 1020 Euros

The photo shows a Garolla clamp connection but DN65 is also available, at extra cost.

Can be connected via a short hose to a rubber impeller pump (Z110 or Z180) or large eccentric screw pump.

Overall dimensions of the unit: 830 mm x 530 mm x 300 mm high,
           top of hopper is 600 mm x 470mm inside the lip.

Note: after a lot of trials we have found that this is not suitable for apple pommace, as there is not enough juice to lubricate the rubber impeller.

 Kiesel B-series stainless steel mohno-pumps, all 380 Volt (3-phase):-

 

90-Maische male thread inlet and DN65 male thread outlet (vertical) with separate 90 degree slow bend ending in DN65 male thread.
Shown fitted with a stainless steel hopper and auger.
For pumping de-stemmed grapes (or juice/wine, with suitable reducing adaptors):-

SP05 B01: 2.2 kWatt, 900 rpm, 5200 litres/hour, 2199 Euros
SP05 B02: 1.0/1.9 kWatt, 700/1400 rpm, 4020/8160 litres/hour, 2529 Euros

SP05 B03: 2.2 kWatt, variable speed motor 280 to 1400 rpm, 1800 to 8700 litres/hour, 3829 Euros
SP05 B05: 2.2 kWatt, frequency regulated motor, 900 rpm, 840 to 8100 litres/hour, 3549 Euros
SP05 B06: 2.2 kWatt, frequency regulated motor in separate control box, 750 rpm, 840 to 8100 litres/hour, 3699 Euros

SP06 B01: 2.2 kWatt, 700 rpm, 9900 litres/hour, 3059 Euros
SP06 B01: 4.0 kWatt, 700 rpm, 9900 litres/hour, 3359 Euros
SP06 B02: 2.5/4.2 kWatt, 700/1400 rpm, 9960/19,380 litres/hour, 3659 Euros

SP06 B03: 3.0 kWatt, variable speed motor 160 to 800 rpm, 1680 to 10,200 litres/hour, 5129 Euros
SP06 B05: 4.0 kWatt, frequency regulated motor, 700 rpm, 2040 to 16,080 litres/hour, 4449 Euros
SP06 B06: 4.0 kWatt, frequency regulated motor in separate control box, 700 rpm, 2040 to 16,080 litres/hour, 4889 Euros

Larger and faster models are available.

Stainless steel hopper and auger, for SP05 and SP06, 450 mm x 520 mm (430 mm high), 90-Maische female thread inlet, 629 Euros

Note: we have found that the above hopper does not work with milled apples, due to the steep sides of the hopper, which results in 'bridging' from one side to the other, so the apple pieces are in an arch above the auger.

Adaptor 90-Maische female thread to DN65 male thread (for when the hopper is replaced with DN65, for pumping), 148 Euros
DN65 hose-tail, 92 Euros (for 65 mm internal diameter hose to convey the crushed berries into a press or tank)
With extra connectors the pump can also be used as a normal wine pump.

Replacement stators: SP05 195 Euros; SP06 215 Euros
Standard stators are for up to 60 C, an NBR heat-resistent stator is available (for up to 100 C).

Prices shown are exclusive of Vat.
Delivery will need to be charged at cost.

www.winegrowers.info