Winegrowers Supplies  -  Stainless Steel fixed capacity Tanks for fermentation and storage

If these tanks are not full then, to prevent oxidation, you need to put a 'blanket layer' of CO2 gas (from a cylinder) over the liquid; CO2 is heavier than air.

I can supply a ZERO Pressure Controller for automatically supplying CO2 to the airspace at the top of a tank.

   Speidel:  

Type FS-MO stainless steel tanks, made in Germany, attractive 'marbled' finish.
Vertical cylinders, three legs, concave top and bottom surfaces, V-channel to DN50 bottom outlet, hole for flap-valve and a man-way door (420 mm x 320 mm), the top surface is AISI 316 higher grade stainless steel.
Many capacities/diameters/heights are available up to 20,000 litres, these are a few examples:-

  1050 litres (1000 mm diameter, 1.785m high) 1523 Euros + delivery from Germany at cost
  1250 litres (1000 mm diameter, 2.035m high) 1665 Euros + delivery from Germany at cost
  1300 litres (1200 mm diameter, 1.597m high) 1752 Euros + delivery from Germany at cost
  1400 litres (1000 mm diameter, 2.273m high) 1872 Euros + delivery from Germany at cost

  1550 litres (1000 mm diameter, 2.424m high) 1905 Euros + delivery from Germany at cost
  1550 litres (1200 mm diameter, 1.847m high) 1829 Euros + delivery from Germany at cost
  1800 litres (1200 mm diameter, 2.097m high) 1944 Euros + delivery from Germany at cost
  2000 litres (1200 mm diameter, 2.253m high) 2200 Euros + delivery from Germany at cost

  2500 litres (1400 mm diameter, 2.123m high) 2435 Euros + delivery from Germany at cost
  3000 litres (1400 mm diameter, 2.453m high) 2785 Euros + delivery from Germany at cost
  4000 litres (1400 mm diameter, 3.111m high) 2965 Euros + delivery from Germany at cost
  5100 litres (1400 mm diameter, 3.849m high) 3380 Euros + delivery from Germany at cost
  5200 litres (1600 mm diameter, 3.165m high) 3895 Euros + delivery from Germany at cost

10,000 litres (1600 mm diameter, 5.561m high) 6027 Euros + delivery from Germany at cost
10,000 litres (2000 mm diameter, 3.666m high) 5953 Euros + delivery from Germany at cost
15,200 litres (2000 mm diameter, 5.392m high) 8106 Euros + delivery from Germany at cost
20,000 litres (2000 mm diameter, 6.880m high) 9339 Euros + delivery from Germany at cost

The above prices do not include fittings:-

stainless steel butterfly-valve with sealing cap: DN50 to DN50, DN40, 32-Mainz or 1" bsp or 2" tri-clamp, 130 Euros
stainless steel Gr.37/70 flap-valve with sealing cap, 80 Euros
level/sight-gauge, 159 Euros upwards according to height
sample tap, 40 Euros
temperature gauge housing, with analogue thermometer, 89 Euros

Cooling jacket, with two 1" bsp male threads, various sizes, 365 Euros per square metre

CIP tube with spray-ball in DN40 fitting, 25 mm tube across and down the side of the tank ending in DN50 male thread with sealing cap,
  and a small (DN10) branch tube to clean the level/sight gauge, 590 Euros

From Slovenia: excellent quality:-

                three legs (350 mm high), an oval man-way door (440 mm x 310 mm), concave bottom and V-channel to DN40 final drain outlet,
DN40 racking outlet, two butterfly-valves (or ball-valves) DN40 female to DN40 male, DN20 sample valve, level/sight gauge, probe for optional thermometer,
DN50 fitting with pressure-relief air-lock at top, the top surface is AISI 316 higher grade stainless steel.
   Prices, including all the above fittings:-

    550 litres (955 mm diameter, 1.225m high) 1435 Euros + delivery from Slovenia at cost
    650 litres (955 mm diameter, 1.355m high) 1509 Euros + delivery from Slovenia at cost
    750 litres (955 mm diameter, 1.505m high) 1545 Euros + delivery from Slovenia at cost

  1000 litres (925 mm diameter, 2.005m high) 1645 Euros + delivery from Slovenia at cost
  1100 litres (955 mm diameter, 2.005m high) 1680 Euros + delivery from Slovenia at cost
  1500 litres (1115 mm diameter, 2.005m high) .... Euros + delivery from Slovenia at cost

  2000 litres (1274 mm diameter, 2.030m high) .... Euros + delivery from Slovenia at cost
  2000 litres (1115 mm diameter, 2.505m high) .... Euros + delivery from Slovenia at cost
  2600 litres (1274 mm diameter, 2.530m high) .... Euros + delivery from Slovenia at cost
  3000 litres (1370 mm diameter, 2.540m high) .... Euros + delivery from Slovenia at cost

  4100 litres (1592 mm diameter, 2.605m high) .... Euros + delivery from Slovenia at cost
  5100 litres (1592 mm diameter, 3.105m high) .... Euros + delivery from Slovenia at cost
  6100 litres (1592 mm diameter, 3.605m high) .... Euros + delivery from Slovenia at cost
  7100 litres (1720 mm diameter, 3.615m high) .... Euros + delivery from Slovenia at cost
  8250 litres (1847 mm diameter, 3.630m high) .... Euros + delivery from Slovenia at cost

10,400 litres (2070mm diameter, 3.630m high) .... Euros + delivery from Slovenia at cost
12,500 litres (1974mm diameter, 4.630m high) .... Euros + delivery from Slovenia at cost
16,000 litres (2229mm diameter, 4.650m high) .... Euros + delivery from Slovenia at cost
18,400 litres (2388mm diameter, 4.650m high) .... Euros + delivery from Slovenia at cost
20,650 litres (2388mm diameter, 5.150m high) .... Euros + delivery from Slovenia at cost

The height is to the very top of the pressure-relief air-lock, plus 350 mm for the legs.
A tank up to 2.40 metres high can be stood upright on a lorry, tanks above that height have to be laid horizontally, so the transport cost is more.

Options:-
Cooling jacket, with two " bsp male threads, 365 Euros per square metre.   Recommended cooling jacket surface area vs volume.

Decantor arm, DN40, rotates through 90 degrees for racking; requires DN40 ball-valve on racking outlet, 260 Euros
top hatch (400 mm diameter), 195 Euros

CIP tube with spray-ball in DN65 fitting, 32 mm tube across and down the side of the tank ending in DN40 male thread with sealing cap,
  and a small (DN20) branch tube to clean the level/sight gauge, 595 Euros
or CIP tube with spray-ball, with 90 degree slow bend and DN40 male thread at top of tank, so you can connect a hose (moving the hose from tank to tank), 390 Euros

thermometer (analogue), 89 Euros
Gr.37/70 flap-valve with sealing cap, 130 Euros
DN50 outlets and valves, instead of DN40, 55 Euros extra for each
RJT 1" male threads and ball-valves (instead of DN threads), 30 Euros extra for each.

Viton seals, for storing high % alcohol (above 45%), price on request.
Completely in AISI 316 higher grade stainless steel, price on request.


Prices shown are exclusive of Vat.
Delivery usually will need to be charged at cost.

www.winegrowers.info