Wine quality PVC hose, non-toxic, clear with a terylene reinforcing web, high quality:-
Winegrowers Supplies - Hose and hose clips
To fit the hose over a hose-connector: first slide the hose clip loosely over the hose, slide it along about 30 cms. Then dip 8
cms of the hose end in very hot water, hold it under the water for about 20 seconds until it softens. Take it out of the water and it will then slide easily over the hose-connector,
don't push it too far or the collar will not have room to move. Position the hose clip and tighten it with a screwdriver and 6 mm spanner.
High temperature hose: to feed from a pasteuriser to a bottle filler or Bib filler and buffer tank:-
food grade, blue, rated for temperature up to 160 °C, 6 mm wall thickness, reasonable insulation,
20 mm internal diameter, £16.50 per metre,
25 mm internal diameter, £22.00 per metre.
Wine quality hard-PVC hose for use with de-stemmer/crushers or large pumps,
or Suction hose spiral wire wound:-
40 mm internal diameter, £8.90 per metre
smaller diameters are available.
Orange rubber hose cleaning balls, 'mice', pushed through the hose with water from a pump or tap:-
recommendation is use 3 together, internal diameter of hose:-
for 13 mm id hose: £1.48 each
for 20 mm id hose: £1.65 each (25 mm or 28 mm diameter ball)
for 25 mm id hose: £1.65 each
for 32 mm id hose: £3.05 each
for 38/40 mm id hose: £3.65 each
for 50 mm id hose: £8.20 each
for 60/65 mm id hose: £9.90 each
9.5-12 mm: £1.40 each
22-30 mm (for 20 mm id hose): £1.95 each
25-35 mm (for 25 mm id hose): £2.00 each
35-45 mm or 35-50 mm (for 32 id mm hose): £2.05 each
50-70 mm (for 50 mm id hose): £3.00 each
10 mm internal diameter, 2 mm wall thickness, £6.00 per metre
12 mm internal diameter, 2.5 mm wall thickness, £9.95 per metre
Prices shown are exclusive of Vat.
Delivery usually will need to be charged at cost.