Winegrowers Supplies  -  Stainless Steel Tanks - up to 3 Bar pressure

- for brewing beer or for holding a carbonated drink before isobaric filling.

  from Italy:-


  - with official PED Certificate - up to 3 bar pressure
  - stackable 2 high
  - moveable by pallet truck or FLT
  - top Hatch 400 mm diameter
  - total drain outlet DIN50 with valve
  - clear outlet DIN50 with valve
  - pressure relief valve
  - AISI 304 stainless steel

  1125 litres  4878.00 Euros, 1000 mm diameter 2140 mm high, optional cooling jacket 1440.00 Euros, insulation over tank wall, 1899.00 Euros

System to carbonate in the pressure tank, 990.00 Euros

  from Slovenia:-

  working pressure 2.5 to 3.0 bar, certified to 3.5 bar, can be made to the exact volume you want, some example prices:-

  2600 litre (1250 mm diameter, 2000 mm high), weighs 450 kilos, 12,475 Euros

  5400 litre (1592 mm diameter, 2500 mm high), weighs 950 kilos, 19,495 Euros

Prices include:-

Double cooling jacket with 2 welded fittings " bsp, 2250 mm x 5000 mm = 11.25 square metres
for water-glycol, working pressure 2.0 bar (certified pressure 4.0 bar).

Insulation on the tank shell: 80 mm thick 'Armaflex'
Tank Shell 1.4301 polished BA (AISI 304), 3.0 mm thick
Outer shell 1.4301 SB Scotch brite (AISI 304), 1.5 mm thick
Bottom and top surfaces: hemispherical, 1.4301 2B (AISI 304) 4.0 mm thick

With 4 tubular feet D125 (139.7 mm x 3 mm) 450 mm reinforced,
Racking port: DIN40 with stainless steel butterfly-valve DIN40 and cap,
Final drain outlet: DIN40 with stainless steel butterfly-valve DIN40 and cap,

Top inlet: DIN65 with stainless steel cap,
Pressure relief valve stainless steel DIN65,
CIP pump over tube 1.1/4 with DIN40 male thread and ss cap DIN40 (no valve),
Manometer and security valve.

CIP top: DIN40, and ss cap DIN40 connection to pump over tube
DIN65 65 mm diameter spray ball with connection DIN25.

Fitting " for pressure indicator.
Fitting " for temperature measurement.
Ladder holder 420mm and 3 hooks at top to lift the tank.

Oval man-way: Laveggi A5 (310 mm x 420 mm) with seal up to 3.2 bar pressure.
Sampling valve DIN20

  from Speidel:-

  300 to 100,000 liters, operating Pressure 1.0 to 3.0 Bar.

Standard equipment:-
Tank shell made of stainless steel 1.4301 (V2A), surface finish IIIc/IIId
Bottom of the tank made of stainless steel 1.4301 (V2A), surface IIIc/IIId
Tank roof made of stainless steel 1.4301 (V2A), surface IIIc / IIId
Marbled outside surface or brushed
safety valve
free standing on welded legs

Eyebolts, ladder support (from 2000 mm tank height)
fitting, ready for installation of the sample tap

-way (340 x 440 mm) from 1000 liters

-in-place:- spray ball, perforations over 360
including cleaning line, connecting thread to DIN40

Final drain outlet:
Arched tank bottom, with
outlet drawn forward,

Valves are extra cost.
Cooling jacket at extra cost.

   Normal delivery time for these Speidel tanks is 4 to 6 months.

Prices shown are exclusive of Vat.
Delivery usually will need to be charged at cost.