Winegrowers Supplies  -  Collecting hopper and auger - for de-stemmed grapes or mash

              

Hopper with 230 volt motorised auger: 600 Euros

390 mm x 390 mm x 200 mm deep; 380 mm high including the leg. DIN50 (or optionally DIN40) male outlet thread.

Can be connected directly to a rubber-impeller pump (Z110 shown in photo) or a large eccentric screw (monho) pump.

Note: we have found that the above hopper does not work with milled apples, due to the steep sides of the hopper, which results in 'bridging' from one side to the other, so the apple pieces are in an arch above the auger.

 IND stainless steel Eccentric screw pumps, 380/400 Volt (3-phase), for pumping de-stemmed grapes or mash etc.

     or   This photo shows a bypass in addition to the Variable frequency drive.

With a stainless steel hopper and infeed auger.
80-Masiche male thread on pump inlet, DIN65 male thread outlet (vertical) including a separate 90 degree slow bend ending in DIN65 male thread.
The hopper can be removed and with a reducing adaptor (80-Maische to DIN65, 195 Euros extra) a hose can be connected instead, for pumpimg liquid.

Two speed model: 4500 and 9000 litres/hour, 1.8 kWatt, 4790 Euros

Model 23248: Eccentric screw pump with frequency regulated motor, 1000 to 9000 litres/hour, 2.4 kWatt, 6750 Euros

35272 Replacement stator (heat resistant to 90 °C) 345.50 Euros

 Kiesel B-series stainless steel mohno-pumps, all 380 Volt (3-phase):-

 

90-Maische male thread inlet and DIN65 male thread outlet (vertical) with separate 90 degree slow bend ending in DIN65 male thread, 110 Euros extra.
Shown fitted with a stainless steel hopper and auger.
For pumping de-stemmed grapes (or juice/wine, with suitable reducing adaptors):-

SP05 B01: 2.2 kWatt, 900 rpm, 5200 litres/hour, .... Euros
SP05 B02: 1.0/1.9 kWatt, 700/1400 rpm, 4020/8160 litres/hour, .... Euros

SP05 B03: 2.2 kWatt, variable speed motor 280 to 1400 rpm, 1800 to 8700 litres/hour, .... Euros
SP05 B05: 2.2 kWatt, frequency regulated motor, 900 rpm, 840 to 8100 litres/hour, .... Euros
SP05 B06: 2.2 kWatt, frequency regulated motor in separate control box, 750 rpm, 840 to 8100 litres/hour, 7143 Euros

SP06 B01: 2.2 kWatt, 700 rpm, 9900 litres/hour, .... Euros
SP06 B01: 4.0 kWatt, 700 rpm, 9900 litres/hour, .... Euros
SP06 B02: 2.5/4.2 kWatt, 700/1400 rpm, 9960/19,380 litres/hour, .... Euros

SP06 B03: 3.0 kWatt, variable speed motor 160 to 800 rpm, 1680 to 10,200 litres/hour, .... Euros
SP06 B05: 4.0 kWatt, frequency regulated motor, 700 rpm, 2040 to 16,080 litres/hour, .... Euros
SP06 B06: 4.0 kWatt, frequency regulated motor in separate control box, 700 rpm, 2040 to 16,080 litres/hour, .... Euros

Larger and faster models are available.

Stainless steel hopper and auger, for SP05 and SP06, 450 mm x 520 mm (430 mm high), 90-Maische female thread inlet, 875 Euros

Note: we have found that the above hopper does not work with milled apples, due to the steep sides of the hopper, which results in 'bridging' from one side to the other, so the apple pieces are in an arch above the auger.

 Adaptor 90-Maische female thread to DIN65 male thread (for when the hopper is replaced with DIN65, for pumping), 244 Euros
DIN65 hose-tail, ... Euros (for 65 mm internal diameter hose to convey the crushed berries into a press or tank)
With extra connectors the pump can also be used as a normal wine pump.

Replacement stators: SP05 165 Euros; SP06 ... Euros
Standard stators are for up to 60 °C, a heat-resistent stator is available (for up to 90 °C) at higher cost.

Prices shown are exclusive of Vat.
Delivery will need to be charged at cost.

www.winegrowers.info