Winegrowers Supplies  -  Stainless Steel fixed capacity Tanks for fermentation and storage

If these tanks are not full then, to prevent oxidation, you need to put a 'blanket layer' of CO2 gas (from a cylinder) over the liquid; CO2 is heavier than air.

I can supply a ZERO Pressure Controller for automatically supplying CO2 to the airspace at the top of a tank.

   Speidel:  

Type FS-MO stainless steel tanks, made in Germany.
Vertical cylinders, three legs, concave top and bottom surfaces, V-channel to DIN50 bottom outlet, hole for flap-valve and a man-way door (420 mm x 320 mm), the top surface is AISI 316 higher grade stainless steel.
Many capacities/diameters/heights are available up to 20,000 litres, these are a few examples:-

  1050 litres (1000 mm diameter, 1.785m high) 1627 Euros + delivery from Germany at cost
  1250 litres (1000 mm diameter, 2.035m high) 1769 Euros + delivery from Germany at cost
  1300 litres (1200 mm diameter, 1.597m high) 1867 Euros + delivery from Germany at cost
  1400 litres (1000 mm diameter, 2.273m high) 1993 Euros + delivery from Germany at cost

  1550 litres (1000 mm diameter, 2.424m high) 2025 Euros + delivery from Germany at cost
  1550 litres (1200 mm diameter, 1.847m high) 1944 Euros + delivery from Germany at cost
  1800 litres (1200 mm diameter, 2.097m high) 2069 Euros + delivery from Germany at cost
  2000 litres (1200 mm diameter, 2.253m high) 2337 Euros + delivery from Germany at cost

  2150 litres (1400 mm diameter, 1.873m high) 2457 Euros + delivery from Germany at cost
  2500 litres (1400 mm diameter, 2.123m high) 2599 Euros + delivery from Germany at cost
  3000 litres (1400 mm diameter, 2.453m high) 2959 Euros + delivery from Germany at cost
  4000 litres (1400 mm diameter, 3.111m high) 3155 Euros + delivery from Germany at cost
  4400 litres (1400 mm diameter, 3.361m high) 3255 Euros + delivery from Germany at cost
  5100 litres (1400 mm diameter, 3.849m high) 3603 Euros + delivery from Germany at cost
  5200 litres (1600 mm diameter, 3.165m high) 4179 Euros + delivery from Germany at cost
  6700 litres (1400 mm diameter, 4.849m high) 4179 Euros + delivery from Germany at cost
  6700 litres (1600 mm diameter, 3.903m high) 5203 Euros + delivery from Germany at cost

10,000 litres (1600 mm diameter, 5.641m high) 6747 Euros + delivery from Germany at cost
10,000 litres (2000 mm diameter, 3.666m high) .... Euros + delivery from Germany at cost
15,200 litres (2000 mm diameter, 5.392m high) .... Euros + delivery from Germany at cost
20,000 litres (2000 mm diameter, 6.880m high) .... Euros + delivery from Germany at cost

15,500 litres (2400 mm diameter, 4.270m high) .... Euros + delivery from Germany at cost
20,000 litres (2400 mm diameter, 5.270m high) .... Euros + delivery from Germany at cost
21,000 litres (2400 mm diameter, 5.520m high) .... Euros + delivery from Germany at cost

The above prices do not include fittings:-

stainless steel butterfly-valve with sealing cap: DIN50 to DIN50, DIN40, 32-Mainz or 1" bsp or 2" tri-clamp, 105 Euros
stainless steel Gr.37/70 flap-valve with sealing cap, 64 Euros
level/sight-gauge, 190 Euros upwards according to height
sample tap, 40 Euros
temperature gauge housing, with analogue thermometer, 89 Euros

Cooling jacket, with two 1" bsp male threads, various sizes, 365 Euros per square metre

CIP tube with spray-ball in DIN40 fitting, 25 mm tube across and down the side of the tank ending in DIN40 male thread with sealing cap,
  and a small (DIN10) branch tube to clean the level/sight gauge, 590 Euros


Prices shown are exclusive of Vat.
Delivery will need to be charged at cost.

www.winegrowers.info